5C Insurance
Installation Floater vs. Builder's Risk for California Contractors
A practical comparison for California contractors of an installation floater and builders risk — covered property, transit and storage, testing, theft, and how the two forms can overlap or leave gaps under actual policy wording.
By 5C Insurance · Published November 16, 2026 · Updated November 16, 2026
Note: Sources reviewed November 16, 2026. Installation floater and builders risk concepts were checked against The Hartford's installation coverage page and The Hartford's builders risk insurance page on that date; these are educational sources, not evidence of carrier appointments or confirmed coverage terms. This guide is practical orientation, not legal advice and not a coverage availability guarantee. Whether either form applies and what it covers depend on the actual policy wording, exclusions, and the facts — confirm each with your broker and counsel.
Two forms with different scope
An installation floater and a builders risk policy both address physical damage to materials and equipment during a project, but their scope can differ. An installation floater typically covers a specific installation package — the materials and equipment a contractor installs — as those goods move through transit, storage, and installation. Builders risk is broader: it addresses the project and the structure under construction against covered causes of loss during the construction period. The two are not interchangeable, and which one applies to a given loss depends on the actual forms, the covered property each defines, and the facts. Do not assume one form covers everything the other does — read both.
Covered property and insurable interests
Ask what each form defines as covered property and whose interest it insures. An installation floater may cover the contractor's installed materials and equipment, while builders risk may cover the broader project including the structure and other parties' work. The insurable interest matters: a contractor installing a package may have an interest in the materials before and during installation, while the owner's interest in the completed structure may be addressed by builders risk. Confirm which form covers which property and which interest, and do not assume the contractor's floater insures the owner's structure or vice versa.
Transit, storage, and site limits
An installation package often moves through several stages before final installation — transit from the supplier, temporary storage, and the installation site. Ask whether the floater covers the package during transit and at temporary storage locations, and what limits apply at each stage. Some forms distinguish site limits from transit or storage limits, and a sublimit may apply to goods off the installation site. Builders risk may also address transit and storage for the broader project, but its terms can differ. Confirm in writing when coverage attaches to the package, what limits apply at each location, and how the two forms coordinate so a gap does not open between transit, storage, and installation.
Exclusions and theft terms
Both forms carry exclusions, and theft is a common question. Ask whether theft of materials is covered, whether a theft sublimit applies, and what conditions the form requires — for example, whether theft from an unattended vehicle or an unsecured site is excluded or limited. Other exclusions to compare include faulty workmanship as a cause versus resulting damage, testing exclusions, and cause-of-loss limitations such as flood or earthquake. Read the exclusions in both forms rather than assuming one fills the other's gaps; a loss excluded under one form may also be excluded under the other.
Testing, start, and end triggers
Installation of mechanical or electrical equipment often involves testing and commissioning before handover, and how each form treats testing can differ. Ask whether the floater covers the package during testing and commissioning, and whether coverage ends at a stated trigger — for example, acceptance, successful testing, or handover. Builders risk similarly has start and end conditions tied to the project schedule. Confirm the triggers in both forms and coordinate them so coverage does not end before the package is fully installed and accepted, and so the permanent property policy picks up where the project form ends.
A hypothetical HVAC or electrical package
Suppose a contractor installs an HVAC or electrical package that ships from a supplier, sits in temporary storage, is installed, and is tested before handover. The questions are separate: Does the installation floater cover the package during transit and storage, and what limits apply at each stage? Does the floater cover the package during testing, and when does coverage end — at successful testing, acceptance, or handover? Does builders risk cover the same package as part of the broader project, or only the structure and other work? If theft occurs from the storage yard, which form responds and what theft sublimit or condition applies? This example does not promise that any claim is covered — the actual forms, exclusions, and limits control, and the two forms may overlap or leave a gap depending on their wording.
Tenant Improvements and Renovations: California Builders Risk Questions → · Tools, equipment, and goods in transit: California inland marine questions →
Overlap and potential gaps under actual forms
The two forms can overlap — both may address the installed package during part of the project — or they can leave a gap if neither covers a particular stage or cause. Ask your insurer's authorized representative how the floater and the builders risk coordinate: which form is primary for the installed package, whether the other form drops down or excludes it, and how other-insurance language treats a shared loss. Do not assume the broader builders risk automatically covers the installation package or that the floater fills every gap the builders risk leaves. Confirm the coordination in writing so you know which form responds at each stage.
A practical comparison checklist
Use this to compare an installation floater and builders risk for your package and project. This is practical orientation, not legal advice or a coverage guarantee.
- Covered property — what each form defines as covered property and whose interest it insures
- Transit and storage — whether each form covers the package in transit and at temporary storage, and what limits apply
- Site limits — the limit at the installation site and whether it differs from transit or storage limits
- Exclusions — faulty workmanship vs. resulting damage, testing, flood, earthquake, and other cause-of-loss limitations
- Theft terms — whether theft is covered, any sublimit, and conditions such as attended-vehicle or secured-site requirements
- Testing and commissioning — whether each form covers the package during testing and when coverage ends
- Start and end triggers — when coverage attaches and ends under each form, and how they coordinate with handover and the permanent policy
- Other-insurance coordination — which form is primary for the installed package and how a shared loss is treated
Frequently asked questions
Next step
Compare the installation floater and builders risk for your package and project, then request a quote with builders risk preselected or ask a coverage question about covered property, transit and storage limits, testing, and how the two forms coordinate.
Put this into action
Request a quote or ask a coverage question — we'll help you apply this to your business.
